- #Okidata microline 320 turbo set top of form registration
- #Okidata microline 320 turbo set top of form software
- #Okidata microline 320 turbo set top of form iso
All the information provided is subject to change from time to time at the sole discretion of Oki Data. However, Oki Data assumes no responsibility for errors or omissions which may occur. Oki Data has taken care to insure that the information is complete, accurate and up-to-date. If the problem occurs, use the menu to turn off this feature.ĭO NOT use Forms Tear-Off with labels or multi-part forms!įorms Tear-Off CANNOT be used when the optional pull tractor is engaged. Top Feed (Single Sheets) Use the single-sheet path for letterhead stationery, memos, and individual memos.
Press the FF/LOAD button to load the paper.
Setting TOF Forms Tear-Off set to OFF - (default) With paper loaded and the printer ON: 1. Engineered for dedicated printing in the most demanding point-of-sale, automation and utility applications, the M元20 Turbo can easily run twice as long as most printers in its class. Users Guide Microline 320/321T-n: Chapter 4 Installation. How you set the Top of Form depends on whether Forms Tear-Off is ON (set to 500 ms, 1 sec, or 2 sec) or OFF (the factory default setting).
#Okidata microline 320 turbo set top of form registration
Uneven print registration will occur due to the paper movement. The Microline 320 Turbo dot matrix printer is enabling new gains in productivity. The pause must be for two or more seconds.
#Okidata microline 320 turbo set top of form software
If the software package you are using "pauses" while sending data to the printer, Forms Tear-Off may be activated (if it is enabled through the Menu). The default setting for Forms Tear-Off is OFF. When printing stops, the paper advances to the tear-off position. Then, the paper moves back down for printing (retracts to the initial print position). Paper remains in the tear-off position until the printer receives more data. The tear bar is located under the clear top of the access cover.
#Okidata microline 320 turbo set top of form iso
The top of the page (perforation) is even with the tear bar. Okidata 320/390/420 Turbo Microline Printers 714 An ISO 9001 Registered Company 2014 Rice Lake Weighing Systems 01/14 Prices and specifications subject to change without notice. For more information, refer to Using Your Printer, Top of Form (TOF). How you set the Top of Form depends on the status of the Forms Tear-Off menu setting. The Top of Form and Forms Tear-Off settings of your printer interact. The Forms Tear-Off feature allows a printed page (continuous forms, rear or bottom feed, with no pull tractor option installed) to be torn off without wasting paper or adjusting the printer.įorms Tear Off automatically moves the paper from the initial printing position to the tear-off position, after a time interval (which you select through the menu). 10Microline 320/321 Turbo The first line prints at the red line of the plastic paper shield (1) on the printhead.
To determine the status of the Forms Tear-Off menu setting, refer to "Using Your Printer, Top of Form, Forms Tear-Off Status (ON or OFF)."įor information on setting the Top of Form, refer to "Using Your Printer, Top of Form, Setting Top of Form, Forms Tear-Off ( ON or OFF )." The status of the Forms Tear-Off menu setting affects how you set the Top of Form.
0 kommentar(er)
